DISCONTINUED | Alternatives can be found under the 'Related products' tab, or contact us for assistance.
The information below is for reference purposes only.
 |  |  |  |
The Opticon OPI3301 is an ultra-lightweight Bluetooth™ CMOS imager that reads 1D or 2D barcodes for healthcare, retail, point-of-sale (POS), inventory or logistics applications. The Opticon OPI3301 uses LEDs for lighting and features a red laser spot for aiming.
Product Features
Full spectrum illuminated imager
high performance white LEDs create a wide range of options for scanning – including scanning of red-colored labels
Laser aiming spot
helps user to target within the field of white light
Properties
Physical
Technical details
IP Ratings (Ingress Protection)
A two-digit number established by the International Electro Technical Commission, is used to provide an Ingress Protection rating to a piece of electronic equipment or to an enclosure for electronic equipment.
The protection class after EN60529 are indicated by short symbols that consist of the two code letters IP and a code numeral for the amount of the protection.
Example: IP65 (NEMA 4)
The two digits represent different forms of environmental influence:
• The first digit represents protection against ingress of solid objects.
• The second digit represents protection against ingress of liquids.
The larger the value of each digit, the greater the protection. As an example, a product rated IP54 would be better protected against environmental factors than another similar product rated as IP42.
IP TABLE:
| IP.. | First digit: Ingress of solid objects |
Second digit: Ingress of liquids |
|---|---|---|
| 0 | No protection | No protection |
| 1 | Protected against solid objects over 50mm e.g. hands, large tools. | Protected against vertically falling drops of water or condensation. |
| 2 | Protected against solid objects over 12.5mm e.g. hands, large tools. | Protected against falling drops of water, if the case is disposed up to 15 from vertical. |
| 3 | Protected against solid objects over 2.5mm e.g. wire, small tools. | Protected against sprays of water from any direction, even if the case is disposed up to 60from vertical. |
| 4 | Protected against solid objects over 1.0mm e.g. wires. | Protected against splash water from any direction. |
| 5 | Limited protection against dust ingress. (no harmful deposit) |
Protected against low pressure water jets from any direction. Limited ingress permitted. |
| 6 | Totally protected against dust ingress. | Protected against high pressure water jets from any direction. Limited ingress permitted. |
| 7 | N/A | Protected against short periods of immersion in water. |
| 8 | N/A | Protected against long, durable periods of immersion in water. |
| 9k | N/A | Protected against close-range high pressure, high temperature spray downs. |
- Bluetooth SPP
Which type of symbologies can be decoded?
.png) |
 Code 39 |
 Code 128 |
 EAN-13 |
.png) |
 QR-code |
 Datamatrix |
 Aztec |
.png) |
Machine Readable Travel Documents |
 |
|
These are samples to show what is meant by this feature.
Please contact us for assistance when in doubt about scanning/decoding functionality.
- 2D
Specifications
- Opticon OPI3301 Wireless Handheld 2D Imager scanner
- Article number: 12920 Opticon OPI-3301-incl battery pack
Operating indicators
- Visual: 1 large LED (red/green/blue)
- Non-visual: Buzzer
Operating keys
- Entry options: 1 scan key
Communication
- Bluetooth: Ver. 2.0, SPP, output power class 2, range up to 10 m, 1 to 1 connection, master/slave mode, authentication and encryption
Power
- Current consumption: 150mA (stand by), max. 300mA
- Rechargeable battery: Lithium-Ion 3.7V 1100mAh
- Operating time: Ca. 10 hours (1 scan / 5 sec)
- Charging method: Separate cradle CRD3301
- Battery charging time: Ca. 3 hours (when charged with power supply), ca. 6 hours (when charged with USB)
2D Imager Optics
- Light source: Aiming laser diode, illumination LEDs
- Scan method: CMOS area sensor, 900 x 512 pixels,gray scale
- Scan rate: Up to 80 fps(excl. focusing)
- Image format: Bitmap, JPEG
- Reading pitch angle: -50 to 0°, 0 to +50°
- Reading skew angle: -50 to 0°, 0 to +50°
- Reading tilt angle: 360°
- Min. resolution at PCS 0.9: 0.127 mm / 5 mil
- Min. PCS value: 0.45
- Field of view: Horizontal 40º, Vertical 23º
- Depth of field: at Code 39 15 - 55 mm / 0.59 - 2.17 in (0.127 mm / 5 mil), 15 - 200 mm / 0.59 - 7.87 in (0.254 mm / 10 mil), 90 - 870 mm / 3.54 - 34.25 in (1.0 mm / 39 mil)
- Depth of field: at QR Code 15 - 170 mm / 0.59 - 6.69 in (0.339 mm / 13 mil)
Supported Symbologies
- Barcode (1D): JAN/UPC/EAN incl. add on, Codabar/ NW-7, Code 11, Code 39, Code 93, Code 128, GS1-128 (EAN-128), GS1 DataBar (RSS), IATA, Industrial 2of5, Interleaved 2of5, ISBN-ISSN-ISMN, Matrix 2of5, MSI/ Plessey, S-Code, Telepen, Tri-Optic, UK/Plessey
- Postal code: Chinese Post, Intelligent Mail Barcode, Korean Postal Authority code, POSTNET
- 2D code: Aztec Code, Aztec Runes, Chinese Sensible code, Codablock F, Composite codes, Data Matrix (ECC200/EC0-140), Maxi Code (mode 2~5), MicroPDF417, Micro QR Code, PDF417, QR code
Durability
- Temperature in operation: -20 to 50 °C / -4 to 122°F
- Temperature in storage: -25 to 60 °C / -13 to 140 °F
- Humidity in operation: 5 - 85% (non-condensing)
- Humidity in storage: 5 - 85% (non-condensing)
- Ambient light immunity: Fluorescent 10,000 lx max, Direct sun 100,000 lx max, Incandescent 10,000 lx max
- Drop test: 1.5 m / 5 ft drop onto concrete surface
- Vibration test: 10 - 100 Hz with 2G for 1 hour
- Protection rate: IP 42
Physical
- Dimensions (w x h x d): 56 x 137 x 113 mm / 2.20 x 5.39 x 4.45 in
- Weight body: Ca. 110 g / 3.9 oz (incl. battery)
- Case: ABS, black or white
Regulatory & Safety
- Product compliance: CE, FCC, VCCI, RoHS, IEC 60825-1 Class 2, IEC 62471, IEC 60825-1 Class 1, IEC 60950-1
Warranty
- 2 year Manufacturer warranty / Fabrieks garantie
Enclosed items
- Hand strap
- Battery pack Article number : 12901
Accessories
Sold separately
- Communication Charging Cradle CRD-3301 Black Article number : 12292
- Universal Menubook Article number : 10961
