DISCONTINUED | Alternatives can be found under the 'Related products' tab, or contact us for assistance.
The information below is for reference purposes only.
Helaas is de NFT7175 niet meer leverbaar.
We hebben de volgende alternatieven voor u beschikbaar:
- Alternatieven uit dezelfde categorie: Scanners - stationair
- U kunt ook gebruik maken van onze * SERVICES | uitleg |
De onderstaande gegevens zijn ter referentie:
 |  |
| Model | : | Opticon NFT-7175 RS232 with DB25EPF connector L Type (11305) |
| Groep | : | Stationary scanners Fixed Mount - With 1D CCD scan engine |
| Datasheet | : | Opticon NFT7175 |
Opticon NFT7175 scans and decodes bar codes at high speed. The L-type dimensions are 47 mm width and 55 mm height.
Product Features
Sheet metal housing
The Opticon NFT7175 is a rugged scanner
RS232 interface
Compatible with almost any device
Available as I-type and L-type
The Opticon NFT7175 has 2 different mounting positions possible
Configurable by bar code configuration manual
A variety of parameters can be set in the Opticon NFT7175
Scan rate up to 700 scans per second
Fast decoding of both wide and small barcodes
Barcode stitching feature
Possibility to scan a rotated barcode
Specifications
- Opticon NFT-7175 CCD Scanner 700 Scans/Decodes
- Article number: 11305 Opticon NFT-7175-RS232 L-Type DB25EPF (Former Article number A25713R0020)
Electrical specifications
- Voltage requirement: 5 V ± 5%
- Current consumption: 220 mA (typical use)
Optical specifications
- Light source: 660 nm red LED
- Photo sensor: CCD linear sensor
- Scan rate: 700 scans/sec
- Decode rate: 700 decodes/sec
- Reading pitch angle: -6 to 0°, 0 to 6°
- Reading skew angle: L-type: -25 to -10°, +10 to +25°
- Reading tilt angle: -10 to 0°, 0 to +10°
- Focal plane: 35 mm / 1.38 in
- Curvature: L-type: R>20 mm (EAN8), R>30 mm (EAN13)
- Reading width: 80 mm / 3.15 in
- Min. resolution at PCS 0.9: 0.2 mm / 0.15 mm at 60 mm reading length
- Min. PCS value: 0.45
- Depth of field:
- L-type: Ca. 30 - 41 mm / 1.18 - 1.61 in (Ca. -5 to +6 mm from focal plane)
Identification
- Supported 1D barcode Symbologies: JAN/UPC/EAN (WPC) incl. add on, (These symbologies are also supported for barcode stitching) Codabar, Code 39, Code 93, Code 128, EAN13, IATA, Industrial 2of5, Interleaved 2of5, MSI/Plessey
Functionality
- Trigger mode: external hardware trigger, serial software trigger
- Configuration: parameters can be set by RS 232 or menu book
- Interface: RS232
Environmental specifications
- Temperature in operation: 0 to 40 ºC / 32 to 104 ºF
- Temperature in storage: -10 to 60 ºC / 14 to 140 ºF
- Humidity in operation: 20 - 80 % (non-condensing)
- Humidity in storage: 20 - 90 % (non-condensing)
- Ambient fluorescent light immunity: L-type: 5,000 lx max.
- Ambient white light immunity: L-type: 5,000 lx max.
- Antistatic electricity: 15 kv (non-destructive)
- Shock packed drop test: 1.5 m / 5 ft drop onto concrete surface
- Shock drop test: 0.6 m / 2 ft drop onto concrete surface
- Shock vibration test: 12 - 100 Hz with 2G for 3 hours
Physical specifications
- Dimensions: L-type: 52 x 55 x 20 mm / 2.05 x 1.85 x 0.79 in (view drawing)
- Case material: sheet metal
- Weight body: L-type: Ca. 110 g / 3.9 oz
- Connector RS232: DB25 F
Regulatory
- Product compliance: EN 55022, EN 55024
Warranty
- 2 year Manufacturer warranty / Fabrieks garantie
- Power supply 5,0V/500mA Article number : 11020
- Universal Menubook Article number : 10961
