Free worldwide shipping on all orders over € 500
During seasonal holiday’s our offices are closed from December 25th up to and including the 2nd of January 2024.
We wish everybody happy holidays and a prosperous and, above all, a healthy new year!
# # # SHIPPING DELAYS # # #
We are noticing shipping delay's from different shippers on inbound and outbound goods.
As always we'll do our utmost best to serve you asap, but please do mind a possible delay with your order.
Thank you for your consideration, team OPTICON.shop
We will not only publish new product announcements and notifications of product discontinuations, but this will also be a place where we share our knowledge on various Opticon products.
As always, you can contact us for any and all of your questions regarding the products we offer.
New firmware has been released for the Opticon OPL-9815 - XBOV0216 - which we refer to as Version 2.16.
DOKKi has developed a new Frame System that stacks multiple layers of their 6-bay docks into one system. A small Frame is available for creating a 2 or 3 layer system and a large Frame is there to build a 4 or 5 layer system.
This means that for all current 6-bay units (CMT-6, CMT-6SPC, CPN-6 and CPN-6SPC) there now can be ordered a 12, 18, 24 and 30 bay version!
New firmware has been released for the Opticon PX-20 - RBMV0042.
Several enhancements have been implemented as well as bug fixes.
One issue that was solved worth mentioning is a fix on occasional data loss with the OPN-2001 simulation application.
New firmware has been released for the Opticon PX-20 - RBMV0040.
A new version of AppLoad has been released - version 1.73.
Support for the latest scanner models have been added as well as the new Opticon logo.
New firmware has been released for the Opticon OPH-1005 - XBPV0210 - which we refer to as Version 2.10.
New firmware has been released for the Opticon OPH-3001 - XBSV0210 - which we refer to as Version 2.10.
New firmware has been released for the Opticon OPH-3001 - XBSV0209 - which we refer to as Version 2.09.
New firmware has been released for the Opticon OPH-1005 - XBPV0209 - which we refer to as Version 2.09.
With the introduction of the latest version of Opticon's CRD-1006 cradle the settings DIP-switch has been replaced by a settings menu.
Although the partnumber and itemnumber haven't changed, there has been a (minor) hardware modification to the CRD-1006. From the second half of November 2018 the latest version of the Opticon CRD-1006 cradle comes without the DIP-switch in the bottom.
This DIP switch was previously used to set the communication speed (baud rate) and has now been replaced by a software menu that resides inside the cradle.
By default the cradle is set to autobaud which is perfectly fine in many cases. But what if you need to set it to a fixed baud rate?
Under Windows 10 installations the Opticon USB drivers aren't necessary, for all other versions make sure that the USB drivers have been installed.
For all Windows versions: Opticon AppLoad has to been installed as well as we'll use this application to change the cradle settings.
|1) Connect the cradle to your PC via the USB cable|
2) Open AppLoad, go to Settings and select the correct Port
Mind that this latest version of Opticon's CRD-1006 cradle won't show up as 'Opticon OPL/CRD USB Serial Port' anymore but as a generic serial USB (VCom) port.
3) Set the cradle type to 'Not installed'
4) In 'Utilities' menu select 'Show RS232 data'
The RS232 monitor opens.
5) In 'Settings' set 'Local echo' to 'On'
6) Press '+++' (only 3 times the plus, without the quotes or an enter!) and wait 1 second.
The menu below will appear.
|Here you can select the necessary baudrate for your application bij pressing the corresponding number.
After selecting a number you will see the (new) current setting at 'Current setting is : '
Don't forget to press 'e' to Save and Exit.
The chosen setting is set and stored in cradle memory, even if power is disconnected.
So you would need to do this only once.
Are you stuck or is something not clear? Contact us, we're here to help!