The MDC-200 is a CCD scanner with a flat design and it scans at a rate of 300 scans per second.
Opticon’s CCD scanners scan nearly all existing 1D barcodes. This engine integrates a CCD scanner with a decoder that communicates the scanned results through a 12 pin FFC connector, suitable for both RS-232C and USB. The engine has a maximum current consumption of 120mA, making this a good choice when a battery powers the engine for a long lasting operating time.
The engine has a compact design with dimensions measuring (WxHxD): 22.8 x 7.5 x 15 mm and with 2.6 grams it is also lightweight.
Properties
Physical
Physical connections:
USB type connections (most common):
subD9 type serial/RS232C connections:
a D9 connector has a 9 pins (or lines)
RJ45 type serial/RS232C connection:
an RJ45 connector has a 8 pins (or lines)
RJ45 type ethernet connection:
an RJ45 connector has a 8 pins (or lines)
RJ50 PIGTAIL type connection:
an RJ45 connector has a 8 pins (or lines)
Pigtail means the cable runs from the device ending in a connector.
- FLAT cable
Technical details
Which type of symbologies can be decoded?
.png) |
 Code 39 |
 Code 128 |
 EAN-13 |
.png) |
 QR-code |
 Datamatrix |
 Aztec |
.png) |
Machine Readable Travel Documents |
 |
|
These are samples to show what is meant by this feature.
Please contact us for assistance when in doubt about scanning/decoding functionality.
- 1D
